Water Softener Repairs You Can Do Yourself

If your water softener is making unusual noises, it may be the result of broken air valves or a clogged water line. Before you attempt any repairs yourself, you should first check for clogs and broken parts. Some water softener repair problems can also be easily resolved by a professional plumber or an expert in water softening. Read on to learn more about some common water softener repairs.

The most common parts of a water softener that need repair include the valve motor and the resin bed. While each model has a different mechanism to regulate the flow of water, there are some common components that need replacing. The valve motor is usually connected to the control head or timer. After disconnecting the wire, you can disassemble the valve motor from the softener. Make sure to remove the old riser tube and discard it properly.

Water softener repairs can be a complicated process, particularly if the system is connected to the whole house water treatment system. To avoid costly issues like flooding, it is best to hire a plumber or water treatment company to complete the repairs. There are many handymen in the Kitchener-Waterloo area who can complete the repair. However, you should not be tempted to tackle this project without professional training. Before starting any water softener repair work, make sure you have a good understanding of water softeners and their repair parts.

Several other common water softener problems can be solved on your own. First, check the regeneration timer. There are several ways to test this. Sometimes, the softener may not run a regeneration cycle. Oftentimes, it is because the regeneration timer is faulty. If it does not run, the softener will not regenerate. Try setting the timer to daily and listen for any sounds.

Next, make sure to ask the plumber for a warranty. Most plumbers have a limited warranty, and if you’re not happy with it, you can ask for a refund. However, if the repair doesn’t solve your problem, you can always hire a new one. If the softener has failed to function properly for too long, the next step is to contact your local water softener repair expert. They will help you determine the right course of action.

Sometimes, the resin beads can become clogged. When this happens, you can run a regeneration cycle to clear up the blockage. Iron, unlike calcium and magnesium, is more difficult to deal with. This substance can clog the resin and foul the resin beads. To get rid of iron, you can replace the resin beads, which can be relatively inexpensive. Also, check the system for salt buildup in the brine tank.

If the water softener has a problem with its salt, it may be due to a malfunctioning system. If you have too much salt, you can simply adjust the dose to reduce the amount of salt. Otherwise, the problem may be caused by sediment buildup in any part of the system. If the sediment is blocking the drain hose, flush the system to remove it. A clogged drain hose is another common cause of a lower water pressure. If the problem isn’t that severe, you may need to replace the resin beads or have the entire unit replaced.

Leave a Comment